BB Tools
BB Indexable End Mill BAP300R BAP400R -PRO
BB Indexable End Mill BAP300R BAP400R -PRO
Couldn't load pickup availability
BB Milling Tool Holder (No insert)
*Note: The overall length of the milling cutter varies depending on the production batch.
120 or 130mm
150 or 160mm
PRO:Hardening process for better strength
HRc45~48
Screw:300R--M2.5*6, 400R--M4*9
APKT1135-MA: This MA shape can Not be installed.
Tight fitting Blade Does Not Crack- Screw Oblique Positioning
The screw is designed to be pulled and tightened, with the blade and blade slot tightly fitting, making it less prone to vibration and breakage, reducing damage
Hardened Tool Holder Easy Cutting
The tool handle uses quenching and hardening process+high hardness without deformation, which can be used for strong cutting, turning, and feeding more than ordinary milling cutters, effectively saving labor hours and improving efficiency
Processing diagram
Wide application range: easy to handle slopes,
slot cutting, and corner cleaning
Note: this type of cutter bar is suitable for workpiece plane, right angle corner clearing step surface and slotting processing. When processing the side edge, it has a slope (carefully pat if you care).
Recommended cutting parameters (300r)
Note: n (mn-1) represents rotational speed (s)
Vc (m/min) represents blade linear speed
fz (mm/t) represents feed per blade
ap (mm) represents cutting amount (Q)
Vf (mm/min) represents workbench feed (F)
ae (mm) represents cross ratio, wood/plastic/copper efficiency can be improved by 20-30%, tool speed (S) n=(1000 "cutting speed VC/(3.14" tool diameter D)
If you have any questions, please consult customer service
Explain:
1. It is recommended that the clamping length of the cutting tool not exceed five times the diameter (under normal circumstances)
2. When installing the blade, it is necessary to pay attention to the fit between the blade and the blade body
3. This table is for reference only. Special circumstances may require special treatment, and adjustments may be made according to the blade brand selected
Insert-APMT
You can click the following picture to choose insert
300R=1135
400R=1604
